Care

Top-notch standards of hygiene and safety are absolutely essential in hospital wards and care homes.  That’s why the new TopClean 60 multi-washer is designed to clean and disinfect just about anything you might find on a ward. From wash basins, trays and vases to operating theatre boots and even children’s toys, this all-round washer-disinfector offers a simple, fast and reliable means of getting things perfectly clean. With the option of choosing between thermal or chemo-thermal disinfection, you can also wash heat-sensitive materials such as operating theatre boots thoroughly and hygienically.

The innovative TopClean 60 multi-washer is the perfect way to meet hygiene requirements while simultaneously fulfilling work safety guidelines and leveraging maximum value from your investment. It can be used to clean and disinfect equipment and utensils fast and hygienically in a wide range of settings – from hospitals and nurseries to beauty salons.

This washer-disinfector saves space and provides 20 cm floor clearance to make it convenient to keep machine surroundings clean and hygienic. The area can be cleaned easily, with no tricky corners.

This washer-disinfector features an integrated stainless steel slop sink unit, making it the perfect small combined care unit. Plus, its floor clearance makes it easy to keep clean.

The funnel-shaped slop sink unit for hygiene purposes comes with no flushing rim, i.e. with no slit for the water. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

This washer-disinfector can be installed and ready to go in the wink of an eye: perfect if a quick setup is what you need. This version allows you to make the best use of existing utility connections and keep your utility room up and running with virtually no disruption.

This washer-disinfector with slop sink unit will meet all your needs when it comes to hygiene, ergonomics and even time. Especially at the installation stage. Simply position and plug in: the dirty utility room can remain fully operational.

The slop sink unit does not use a flushing rim and it is made from 100% stainless steel. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

This model saves space. You see, the ready-to-connect installation frame disappears into the tiled wall making it even easier to keep the space around the appliance clean. This version is ideal for furnishing patient rooms.

This integrated version offers a key benefit for intensive care units and isolation wards: it eliminates the need to carry contaminated care utensils, such as bedpans and urine bottles, along the corridors, instead keeping each care utensil assigned to one particular patient.

For further product information, please contact your sales partner.

The installation frame is completely ready to connect and it disappears behind the tiled wall. The additional central connection connects to any industry-standard WC, meaning the washer-disinfector can be positioned immediately above the toilet – ideal for integrating into ensuite bathrooms and patient bedrooms.

When it comes to cleaning care utensils, patient-specific solutions are the best choice, especially in isolation wards, intensive care units, and anywhere else where you want to minimise the distance between the patient and the nearest washer-disinfector.

This cabinet model is the perfect addition to any utility room set-up, be it pre-existing or completely new. Compact dimensions make for a good fit underneath the work surface – maximising the work surface space available.

When combined with additional items like shelves to be installed above the washer-disinfector, this version creates an excellent environment for hygienically safe care utensil cleaning and storage.

This compact model provides a work surface at a useful height for more ergonomic, more pleasant work. The integrated wash basin provides care staff with an easy option for hand hygiene.

Additional modules, like drying and storage racks for urine bottles and bedpans, will turn this functional unit into a professional cleaning station in a jiffy.

When space is a squeeze, this compact combined care unit comes into its own. That gives you plenty of room and work surface to get the job done, even in small dirty utility rooms.

The slop sink unit comes without a flushing rim, eliminating the gap that could otherwise provide a breeding ground for germs and biofilms. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

By including additional modules like drying or storage shelves, it is quick and easy to turn this unit into a small professional cleaning station.

A unit featuring an integrated slop sink unit and hand wash basin for the highest possible hygiene standards – in the smallest possible space. The height of the work surface has been positioned based on ergonomic considerations so as to provide a pleasant work environment that is conducive to good employee health.

The slop sink unit comes without a flushing rim, eliminating the gap that could otherwise provide a breeding ground for germs and biofilms. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

This is the ideal combination if you are looking for more storage or work surfaces in the dirty utility room. An integrated slop sink unit, wash basin and base cabinet make this an incredibly practical and versatile bedpan washing system.

The slop sink unit does not use a flushing rim and it is made from 100% stainless steel. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

An extra large inset wash basin is combined with a slop sink unit, a base cabinet and a MEIKO washer-disinfector. The result is a truly practical, clean solution well suited to the real world and to any dirty utility room.

Since this is a cabinet solution, it provides plenty of space for drying and storage racks which can be installed above the unit. This means that clean care utensils can be unloaded in double-quick time and are better protected from recontamination with pathogens.

The slop sink unit does not use a flushing rim and it is made from 100% stainless steel. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

The large size makes this option incredibly versatile: soak sink, hand wash basin and MEIKO washer-disinfector come together to provide the highest standards of hygiene, plus a base cabinet for additional storage space, generous work surfaces for more space to get the job done and improved workplace ergonomics.

The slop sink unit does not use a flushing rim and it is made from 100% stainless steel. It comes with spiral flushing. This system uses two self-cleaning and easily replaced nozzles to generate water jets.

This combined care unit offers even more than cutting edge cleaning and disinfection technology by MEIKO. That, plus a slop sink unit with no flushing rim, a generous soak sink and a hand wash basin will cover every one of your hygiene needs. Not to mention the spacious work and storage surfaces, or even the roomy storage space in the cabinet. Everything has its proper place here.

The heavyweight of the combined care units: this washer-disinfector is best as part of a multifunctional dirty utility room concept with a slop sink unit with no flushing rim, a hand wash basin with a large soak sink, and plenty of work surface space as well as incredibly generous storage space.

There's no doubt that a washer-disinfector is one of the most important pieces of equipment in a dirty utility room. But when you're faced with tasks where every single step needs to be intuitive and perfectly hygienic, you need plenty of support in other areas, too. For example, drying and storage racks keep everything organised, and there's plenty of extra space in our wall-mounted cabinets, available with or without doors.

The TOPIC 10 is quick and easy to install while taking up a minimal amount of space. Simply mount it on the wall, connect it up and it's ready for use! This cleaning and disinfection appliance is the perfect choice if you're planning to modernise or renovate your facility. It is wonderfully easy to use with our ‘one touch’ operating concept. Of course, we never compromise on hygiene safety so the TOPIC 10 features an A0 value control system in line with DIN EN ISO 15883. All of that makes life significantly easier for care staff while simultaneously enhancing both staff and patient safety.

The layout of this small combined care unit could not be any more compact. Not to mention all the usual TOPIC hygiene benefits (A0 value control system in line with DIN EN ISO 15883) as well as the space-space saving dimensions of 1,000 mm x 1,830/700 mm (from the floor). Ideal for reliable emptying, cleaning and disinfection of bedpans, urine bottles and potties. This makes your carers' work easier and improves the safety of staff and residents alike. Allowing staff members to focus on care instead of cleaning chores.

The right hygiene concept in a compact format: the TOPIC cleaning and disinfection appliance as a floor-standing unit. Quick and easy to install, it also takes up a minimal amount of space. We know that just quick installation and ease of use with our ‘one touch’ operating concept won't cut it: hygiene safety cannot suffer. And it doesn't. The programme cycles on the TOPIC can be individually adjusted using the A0 value control system as per DIN EN ISO 15883.

TOPIC small combined care units are designed with a clear focus on quality. They are simple to install, offer comprehensive features, and are easy to integrate in your existing utility room. At 1,000 mm x 1,730/700 mm, this combined unit is somewhat shorter than the TOPIC 10 but still a good, ergonomic working height. It also features an A0 value control system with short, adjustable programme cycles and the cleaning and disinfection process is vapour sealed.

The TOPIC 40 is quick and easy to install and features both thermal and acoustic insulation. At just 900 mm x 900 mm, it is impressively compact and even creates additional work surface space with its table top. All that, and you can still expect everything from this cabinet model that you get from the floor-standing units in the TOPIC range: complete hygiene safety thanks to the A0 value control system as per DIN EN ISO 15883 and our ‘one touch’ operating concept with large membrane keys and clear icons.

Hygienic workflows in care homes, outstanding ergonomics, and an optimum use of space – that's what you get when you choose the TOPIC 40 small combined care unit. It consists of a cleaning and disinfection appliance, a table top and a hand wash basin. At just 900 mm in width, this petite package packs a powerful punch: a vapour-sealed cleaning and disinfection process, as well as short programme cycles tailored using the A0 value control system as per DIN EN ISO 15883, all of which contribute to improved hygiene in nursing homes.

Depending on your needs, this model can incorporate a bedpan washer-disinfector, work surfaces, slop sink and hand wash basin.

A compact combo unit offering powerful performance – that's what you get when you choose this automatic bedpan flusher-disinfector embedded in a custom combined sluice unit of your choice. Simply add a work surface, hygienic slop sink, and hand wash basin – plus whatever cupboard space you need – and enjoy an outstandingly compact unit that maximises hygiene in your day-to-day work. This system helps prevent the spread of dangerous bacteria which could lead to hospital-acquired infections. Simply pop it in place, connect it up, and it's ready to use! With its built-in TOPIC automatic bedpan flusher-disinfector, this combined sluice unit can also be upgraded and expanded at a later point in time, for example by adding additional cupboards, more work surface space, a larger sink or additional shelving for storing bedpans, urine bottles, kidney bowls or children's potties.

The TOPIC automatic bedpan flusher-disinfector is quick and easy to install and features both thermal and acoustic insulation, making it a convenient and hygienic choice for care homes and nursing facilities.

And this is the only respirator washer of its size that can clean and disinfect regulators even while they are still pressurised.
 
TopClean M sets new standards in efficiency, speed and flexibility, cleaning and disinfecting up to 40 masks or 80 regulators an hour in an innovative chemo-thermal disinfection process. 

Designed to be ergonomic and easy to use, the respirator washer also offers reliable and reproducible hygienic cleaning results which fully adhere to both safety guidelines and mask manufacturers' instructions – just some of the many benefits offered by TopClean M.
 
TopClean M can simplify your workflow and increase the productivity of your equipment workshop so that the equipment your team needs for their next call-out will be ready for action in no time. It's never been easier to ensure you stick to the Personal Protective Equipment (PPE) guidelines.

Developed and tested in collaboration with specialists from the fire service

The idea behind the TopClean M respirator washer evolved directly from real-life fire service operations. That's why TopClean M is so perfectly suited to the special requirements of respiratory protection equipment cleaning and disinfection – and why it is such a great choice for any respiratory equipment workshop.